FXR Parts

Drag Specialties - 53-5/16" Black Vinyl High-Efficiency Clutch Cable (Repl. OEM #38599-83A) Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve for smooth operation High-performance...

Drag Specialties - Crankcase Breather Kit fits '93-'17 Big Twin Models (Exc. '17 FXDLS, '16-'17 Softails & '08-'17 Dressers) Features Comes with breather bolts, washers and hardware Works with most aftermarket air cleaners One-piece chrome tube...

Saddlemen - Unknown Step Up Seat fits '82-'00 FXR Models Features Often imitated; never duplicated. The original Harley-Davidson stunt seat. Saddlemen seats with GELcore Technology are the only motorcycle seats scientifically proven to reduce...

Wild 1 Chubby Flatline 12" Handlebars Features: 1-1/4" diameter Drilled for internal wiring Chrome Made in USA Measurements: 12" TALL 24" WIDE FLAT 0" PULL BACK 0° WRIST ANGLE

Wild 1 Physco Street Fighter 14" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal wiring Polished welds/ diamond...

Wild 1 Physco Street Fighter 10" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal wiring Polished welds/ diamond...

Jims - 729 Inner Primary Seal/Bearing Removal/Installation Tool fits '85-'20 Big Twin Models Features: Gives a much better feel than a press while eliminating the possibility of applying too much pressure to the parts Provides precise installation...

Jims - 1709 Sprocket Shaft Bearing Tool fits '77-'02 Big Twin Models Features: Tool is used to remove the sprocket shaft Timken® bearing on late '86-'02 Big Twins with an integral sprocket shaft Does the job better than anything else on the...

Jims - 95660-85 Transmission Main Seal Driver fits '85-'06 Big Twin 5-Speed Models Features: Optional drivers used in conjunction with main shaft seal tool allow installation of seals Fitment 2002 Harley-Davidson Softail Fat Boy EFI...

Jims - 2234 Primary Drive Lock Tool fits '70-'06 Big Twin & '86-'22 Sportster Models Features: Use on all primaries between front primary chain and motor sprocket Made in the U.S.A. Fitment 2016-2017 Harley-Davidson 1200 Roadster...

Jims - 2233 Tappet Oil Filter Plug Tool fits '70-'99 Big Twin Models Features: Removes oil screen without removing exhaust Used to remove the tappet oil screen plug Made in the U.S.A. Fitment 1999 Harley-Davidson Softail Night Train...

Jims - 94547-80A Sprocket Shaft Bearing Race Tool fits '69-'02 Big Twin Models Features: Must use with JIMS® Race and Bearing Install Handle (PART# DS-196042) Used to remove and install Timken® bearing race on motor cases Made in the U.S.A...

Jims - 1012-70TB Cam Bushing Installer fits '70-'99 Big Twin Models (Except Twin Cam (OEM #25581-70)) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length HSS drill bit included with jigs Use staking...

Jims - 1013-54TB Pin Bushing Installer fits '54-'92 Big Twin Models (OEM #25582-54/73) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length HSS drill bit included with jigs Use staking dowel pin Made...

Jims - 95760-TB Puller Camshaft Bearing fits '58-'99 Big Twin Models (Except Twin Cam) Features: Used to remove inner cam bearing without damaging the crankcase Tool is also designed to keep rollers from falling into the crankcase Comes with...

Jims - 95760-TP Pinion Bearing Puller fits '54-'99 Big Twin Models Features: Use to remove pinion bushing from cam cover in one easy operation Use with JIMS® Cam Cover Holder Made in the U.S.A. Fitment 2000 Harley-Davidson FXR...

Drag Specialties - 3-1/4" Chrome Magnetic Ring Oil Filter With Nut fits '86-'22 Sportster (Except RH Sportster), 09-12 XR1200/X Models (OEM #63806-83, 63796-77A) Features: High-quality chrome spin-on-style oil filters Magnetic filters are designed...

Drag Specialties - Paper Oil Filter with Spring fits '65-'82 FX/FL, '57-'78 Sportster Models (OEM #63835-87T, 63837-92T, 6383940-53) Features: High-quality drop-in oil filter Fitment 1982 Harley-Davidson Super Glide II...

S&S Cycle - Billet Oil Pump Kit fits '92-'99 Evolution Big Twin Models Features: Kit includes an oil pump with cover, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball and spring, pressure relief valve and...

S&S Cycle - Valve Spring Kit fits '48-'84 Big Twin Models Features: To be used with cams with up to .550" lift Includes springs and aluminum top retainers 140-lb. seat pressure Must allow additional rocker clearance for 48-65 Panheads Made in...

Belt Drives Ltd. - BDLPCP-0007 Replacement Clutch Kit for Rivera Primo Pro Clutch fits '90-'97 Evolution Big Twin Models Features: Complete replacement clutch plate kits for Primo Rivera belt drives listed Include all friction plates, drive plates...

Colony - 8703-2 Relief Valve Plug Kit fits '81-'84 Big Twin Models (OEM #26263-80) Features: Plug and plug kits designed for a variety of Harley-Davidson® oil systems Complete with washers (or O-rings if required) Made in the U.S.A...

V-Twin - Oil Pump Pressure Valve Stainless Steel fits '82-'91 FXR, '86-'91 FLST, '84-'91 FXST Models Machined stainless steel oil pump pressure valve for Big Twins. Fits oil pressure relief valve port on oil pumps. Used as an oil pressure indicator...

V-Twin - Transmission Motor Support fits '82-'94 FXR Model Zinc plated transmission motor support features laser cut 1/4" steel with all holes in place. Includes the tab for front exhaust mounts. Acts to absorb torque between the drive train...

Drag Specialties - 40 Spoke Chrome Laced Wheel 21” x 2,15.” fits '99 FXD, '86-'99 XL (Single or Dual Disc (OEM #43557-87)) Features: Valve Stem: CMV (Center Metal Valve) Uses OEM mounting hardware; designed to use OEM style rotors,...

Drag Specialties - 40 Spoke Chrome Laced Wheel 19” x 2.5” fits '86-'99 Sportster (OEM #43312-84) Features: Valve Stem: CMV (Center Metal Valve) Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully...

Drag Specialties - 40 Spoke Chrome Laced Wheel 19" x 2.5" fits '78-'83 FXR/FX, '78-'83 XL (Dual Disc (OEM #43341-78)) Features: Valve Stem: CMV (Center Metal Valve) Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and...

Drag Specialties - Front Master Cylinder Repair Kit fits '82-'85 Big Twin, '82-'E85 Sportster, 3/4” bore (OEM #45042-82, 45063-82) Features: Meet or exceed OEM specifications Fitment 1985 Harley-Davidson Low Glide Custom...

Colony - Head Bolt Set fits '86-'91 Sportster Models (OEM #16478-85A, 16480-85A) Features: 12-point replacement headbolts Made in the U.S.A. Fitment 1992 Harley-Davidson Dyna Daytona FXDB - - 1991 Harley-Davidson Dyna Sturgis...

Drag Specialties - Oil Pressure Gauge Mount fits 80” Evolution Engines (Except FLT/HT/HS/HR/​Ultra) Features: Chrome mount attaches at the crankcase and rocker box mounting bolt, allowing an unobstructed view of your oil pressure Stock oil...

Drag Specialties - Chrome Oil Tank fits Most Aftermarket FXR Frames (OEM #62406-81) Features: Formed steel construction with a chrome finish Bolt-in application; uses OEM mounts Fittings, clamps and hoses included Approximately 3.0 quart...

V-Twin - Chrome 48" Handlebar Switch Kit fits Big Twin Models Handlebar switch kit includes complete right and left switch assemblies, brake light switch, mounting screws, and clips. Switch kit measures 48" long and has a chrome finish. Fitment: FXR...

V-Twin - Black Front 1 Piston Caliper Set fits FXR & XL Models (OEM #44195-80) Features: Caliper set includes body, 1 piston, seals right and left, brake pads and inner and outer plates flat black finish Order mounting hardware separately Sold...

V-Twin - Mid Control Kit fits '83-'86 FXR Models - Chrome Features: FXR mid control kit features chrome mounts, chrome brake pedal and footpeg supports. factory style components for installation. Order brake line, reservoir feed line and additional...

Colony - 8707-6 Oil Pump Plug Kit fits '81-'84 Big Twin Models Features: Plug and plug kits designed for a variety of Harley-Davidson® oil systems Complete with washers (or O-rings if required) Made in the U.S.A...

Drag Specialties - 37" Black Vinyl Throttle Cable fits '96-'17 Big Twin, '07-'22 XL Models (Except '99-'01 EFI Dressers, '21-'22 XL S/RH 1250S, '22 Nightster/RH975) - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl...

Drag Specialties - 42-1/2" Black Vinyl Throttle Cable fits '96-'17 Big Twin, '07-'22 XL Models (Except '99-'01 EFI Dressers, '21-'22 XL S/RH 1250S, '22 Nightster/RH975) - Alternative Length Features: Cables feature polished-chrome fittings, black...

Drag Specialties - 45-1/2" Black Vinyl Throttle Cable fits '96-'17 Big Twin, '07-'22 XL Models (Except '99-'01 EFI Dressers, '21-'22 XL S/RH 1250S, '22 Nightster/RH975) - Alternative Length Features: Cables feature polished-chrome fittings, black...

Drag Specialties - 47-1/2" Black Vinyl Throttle Cable fits '96-'17 Big Twin, '07-'22 XL Models (Except '99-'01 EFI Dressers, '21-'22 XL S/RH 1250S, '22 Nightster/RH975) - Alternative Length Features: Cables feature polished-chrome fittings, black...

Drag Specialties - 48-1/2" Black Vinyl Throttle Cable fits '96-'17 Big Twin, '07-'22 XL Models (Except '99-'01 EFI Dressers, '21-'22 XL S/RH 1250S, '22 Nightster/RH975) - Alternative Length Features: Cables feature polished-chrome fittings, black...