V-Twin Manufacturing

V-Twin - 35-9187 - Carburetor Accelerator Rebuild KitDescriptionCarburetor accelerator rebuild kit includes all parts to rebuild accelerator pump. For S&S Super "E" and "G" carburetors...

V-Twin - 35-9127 - Schebler Carburetor KitDescriptionSchebler carburetor kit includes needle, seat, float arm and pin. Float is not included. Fits:JD 1921-1929Additional Information UOM1 - KIT ...

V-Twin - 35-9104 - Schebler DLX Carburetor FloatDescriptionSchebler DLX carburetor float with eccentric center is molded of 100% nitrophyl material unsinkable. The duck stops here... Brass slot head...

V-Twin - 35-8019 - Cast Iron Intake ManifoldDescriptionFlathead cast iron intake manifold with brass packing rings and cadmium plated nuts. This manifold is the shorter version 1938 style.Manifold is...

V-Twin - 35-6109 - Replacement Fuel Filter KitDescriptionReplacement fuel filter kit is OEM style and fits Evolution Touring models. Fits:FLT 1995-2001FLHR 1995-2001FLHT 1995-2001Additional...

V-Twin - 35-2448 - OKO Shorty Drain ValveDescriptionOKO shorty drain valve. Fits:Custom application for S&S and OKO shorty carburetorsAdditional Information UOM1 - EA ManufacturerV-Twin ...

V-Twin - 35-2002 - Linkert Carburetor Float BowlDescriptionLinkert carburetor float bowl without drain hole provision fits all Side Valve linkert carburetors. Fits:All Side Valve linkert...

V-Twin - 35-1942 - M74 Linkert Carburetor AssemblyDescriptionM74 Linkert carburetor assembly with a black finish is for Knuckleheads and includes the correct throttle arm installed. Fits:FL...

V-Twin - 35-1941 - M41 45 Linkert KitDescriptionM41 1-5/16" 45" Linkert carburetor kit.Includes venturi, bowl, throttle arm, throttle shaft, choke shaft, needle, throttle door, float bowl and gaskets...

V-Twin - 35-1887 - Float Bowl KitDescriptionFloat bowl kit fits Super "E" shorty and OKO carburetors only. Kit includes rebuild kit, bowl, nitrophyl float, lever and screws. Fits:Replacement Super...

V-Twin - 35-1878 - Linkert Cable BracketDescriptionLinkert cable bracket is for use with snap throttle kit.For use with threaded cable ferrule to accept universal cable. Fits:FL 1941-1965U...

V-Twin - 35-1826 - Linkert Carburetor Fixed JetDescriptionLinkert carburetor fixed jet #5 fits M65, M84 and M97 Linkert carburetors. Fits:Special applicationAdditional Information UOM1 - EA ...

V-Twin - 35-1805 - Schebler Carburetor Rebuild KitDescriptionSchebler rebuild kit is for all 1-1/4" Schebler brass DLX carburetors with brass bowl. Fits:All 1-1/4" Schebler Brass Bowl DLX...

V-Twin - 35-1790 - WR Manifold KitDescriptionWR manifold kit includes manifold, brass seals, adapter inserts and hex nuts. Fits:WR 1941-1952Additional Information UOM1 - KIT ManufacturerV-Twin ...

V-Twin - 35-1789 - EFI Throttle ShaftDescriptionEFI throttle shaft. Fits:FLT 2001-UPAdditional Information UOM1 - EA ManufacturerV-Twin OriginImported

V-Twin - 35-1683 - M74 Linkert Carburetor AssemblyDescriptionM74 Linkert carburetor assembly features a brass finish. Assembly is for use with Knuckleheads and includes the the correct throttle arm...

V-Twin - 35-1668 - 40mm CV Carburetor KitDescription40mm CV carburetor kit includes a 40mm CV carburetor, manifold, manifold flange kit and support bracket with the integral breather.The manifold...

V-Twin - 35-1661 - Linkert Needle And Seat AssemblyDescriptionLinkert needle and seat assembly features stainless steel needle machined brass seat with hose barbed end. Fits:FL 1941-1965Additional...

V-Twin - 35-1660 - Keihin Carburetor Rebuild KitDescriptionKeihin carburetor rebuild kit contains all components for a professional accelerator pump rebuild.Includes 59.5mm Keihin accelerator pump...

V-Twin - 35-1659 - CV Carburetor Top BlackDescriptionBlack CV carburetor top with choke bracket built in. Fits:FX 1993-2006XL 1988-2006Additional Information UOM1 - EA ManufacturerV-Twin ...

V-Twin - 35-1392 - Shut Off Rod SeatDescriptionShut off rod seat is zicad plated with a rotary shut off petcock design.Use with 5/16" fuel line on barbed end. Shut-off rod will not fit with this rod...

V-Twin - 35-1326 - Idle Speed Adjustment ScrewDescriptionIdle speed adjustment screw for EFI models.Idle adjustment screw replaces the IAC activator and allows idle speed to be controlled by...

V-Twin - 35-1324 - Idle Control MinimizerDescriptionIdle control adjustment screw for EFI models.Idle adjustment screw replaces the IAC activator and allows idle speed to be controlled by adjusting...

V-Twin - 35-1063 - Linkert DC Carburetor KitDescriptionLinkert DC carburetor kit.Includes bowl screws, bowl gasket, body gasket, bowl nut gasket, intake manifold gasket, drain screw, throttle shaft,...

V-Twin - 35-0973 - Linkert Carburetor Main NozzleDescriptionLinkert carburetor main nozzle. Fits:Chief 1941-1952Additional Information OEM No.102628 UOM1 - EA ManufacturerV-Twin OriginUSA

V-Twin - 35-0953 - Linkert Carburetor Bombsight VenturiDescriptionBombsight Venturi fits 1-1/4" for the Linkert Carburetors.*NOTE: "Bombsight" type venturi's may require a shorter main nozzle. Fits:W...

V-Twin - 35-0949 - Linkert Carburetor Bombsight VenturiDescriptionBombsight Venturi fits 1-1/2" for the brass Linkert carburetors and is the performance dual venturi used on WR MR-3, MR-4, KR and KH...

V-Twin - 35-0891 - Petcock Adapter Set ChromeDescriptionChrome petcock adapter set is used for converting Magneti Marelli injection to carburetor system.Includes fuel outlet plug. Petcock adapter set...

V-Twin - 35-0882 - Replica Petcock Nickel PlatedDescriptionNickel plated petcock features 1/8"-27 NPT on the side fitting the gas tank and 1/2"-24 NPT on fuel line connection side.*NOTE: Diassemble...

V-Twin - 35-0854 - Carburetor EnrichmentDescriptionCarburetor enrichment is 3-position with o-ring knob for S&S Super "E" & "G" carburetors. Fits:Replacement application for S&S Super E and G...

V-Twin - 35-0836 - Linkert Bombsight Venturi KitDescriptionBombsight venturi fits 1-1/2" brass Linkert carburetors, kit includes removal tool which includes three interchangeable adaptors to service...

V-Twin - 35-0835 - Petcock ScreenDescriptionPetcock replacement filter screen. Fits:Replacement application for petcocks with 3/8" NPT threadAdditional Information UOM5 - PK ManufacturerV-Twin...

V-Twin - 35-0834 - Petcock ScreenDescriptionPetcock replacement filter screen.Reserve tube not included. Fits:Replacement application for petcocks with 13/16" nut connectionAdditional...

V-Twin - 35-0661 - Petcock Fuel Valve ChromeDescriptionFuel gas tank petcock valve is for use as a fuel shut off to carburetors. Hex nut and screen not included.Features filter as original. Fits:FLT...

V-Twin - 35-0650 - Petcock with Threaded End Description Petcock with threaded end for fuel line has a natural finish on zinc construction.The hose size measures 7/16 and features a lever on both...

V-Twin - 35-0584 - Replica Petcock Natural AlloyDescriptionPetcock features a natural alloy finish and includes nut and screen for XL models.Designs are made for a seated position on the motorcycle...

V-Twin - 35-0570 - Petcock Right Outlet BlackDescriptionBlack petcock with right outlet features 3/8" National Pipe Thread. Includes nylon filter screen, washer, and reserve position. Fits:FX...

V-Twin - 35-0481 - Linkert Carburetor Main NozzleDescriptionLinkert carburetor main nozzle.Clearance for this main nozzle may need to be adjusted for exact fit on some bodies. Main nozzle holes must...

V-Twin - 35-0474 - Carburetor Service and Hardware KitDescriptionLinkert service and hardware kit includes a nitrophyl float, zinc plated steel screw kit, gaskets, stainless steel needle and a brass...

V-Twin - 35-0457 - CV Carburetor Slow JetDescriptionCV Carburetor Slow Jet is .052mm. Fits:FLST 1990-2017XL 1988-UPFLT 1993-2006FXST 1990-2017FXD 1993-2017FXR 1990-1994Additional Information OEM No...